Page
77
301 Fulling Mill Road, Suite G
©Copyright 2012 by Legrand,
Middletown, PA 17057
Inc All Rights Reserved.
(800)-321-2343
www.onqlegrand.com
Appendix C: Troubleshooting
T1.
How do I restore my Access Point’s configuration to its factory default settings?
With the Access Point powered on, use a pin to press and hold the
RESET
button on the rear
panel for more than 8 seconds before releasing it.
Note: Once the Access Point is reset, the current configuration settings will be lost and
you will need to reconfigure the Access Point.
T2.
What can I do if I forget my password?
1)
Restore the Access Point’s configuration to its factory default settings. If you don’t know how
to do that, please refer to previous section
T1
;
2)
Use the default user name and password:
admin
,
admin
;
3)
Try to reconfigure your AP by following the instructions of this UG.
T3.
What can I do if I cannot access the web-based configuration page?
Assign a static IP address 192.168.40.100 for your computer first before logging onto the
management page. Here are the procedures in Windows 7, for example.
1)
Go to
Start
>
Settings
>
Control Panel
, and then Click
View network status and tasks
.
