Owner’s Manual of DA1104
-74-
Disable WPS
You can check the box to disable the WPS function.
WPS Status
Here you can check if the connection via WPS is established or not.
Self-PIN Number
It is the PIN number of the DA1104.
Push Button
Configuration
Click the “Start PBC” to activate WPS as well in the client device within
2 minutes.
Client PIN Number
In addition to the PBC method, you can also use the PIN method to
activate the WPS. Just enter the PIN number of the client device in the
field and click the “Start PIN” button.
The WPS encryption can be implemented only between your Router and another
WPS-capable device.
Example of how to establish wireless connection using
WPS
. Please take the following steps:
Step 1.
Choose menu “
WLAN2 (2.4GHz) WPS
” to configure the setting for WPS. After the configuration,
please click the “Apply Changes” button to save the settings.
Step 2.
Add a new device.
If the wireless adapter supports Wi-Fi Protected Setup (WPS), you can establish a wireless connection between
the wireless adapter and the AP using either Push Button Configuration (PBC) or PIN methods.
To build a successful connection by WPS, you should configure the corresponding new device
for WPS function.
A.
By Software Push Button Configuration (PBC)
