RMF3/RMT3/RLF3/RLT3
Installation Instructions
16
Tilt (RMT3/RLT3 Only)
The interface brackets (U and V) allow from -2° to 12° tilt, and
can be locked at 0°, 6° and 12°.
1.
Loosen the interface bracket knob.
2.
Adjust tilt as required. (See Figure 16)
3.
The tilt may be locked at 0°, 6° or 12° using one 1/4"-20 x 1"
bolt (Z) and one 1/4"-20 nut (Y) per interface bracket. (See
Figure 16)
4.
Tighten interface bracket knob.
Figure 16
Locking Mount (Optional)
1.
Add padlock (not included) to interface bracket to complete
security. (See Figure 17)
NOTE:
The padlock maximum shackle diameter is 5/16"
(7.9 mm).
Figure 17
Post-Installation Leveling
1.
If required, adjust level of monitor by turning set screws on
top of each interface bracket. Turn screws clockwise to
lower the level and counter-clockwise to raise the level.
(See Figure 18)
Figure 18
Interface
1
bracket
knob
4
Lock at
0˚ tilt
Lock at
6˚ tilt
Lock at
12˚ tilt
(RLT3 shown)
Y (2)
3
Z (2)
1
Padlock shackle
- 5/16" (7.9mm)
maximum diameter:
(RLT3 shown)
1
