background image

 LF49/50/55UxP, LF49/50/55UxP-B2B

Installation Instructions

2

DISCLAIMER

Legrand 

|

 AV and its affiliated corporations and subsidiaries 

(collectively “Legrand 

|

 AV”), intend to make this manual 

accurate and complete. However, Legrand 

|

 AV makes no claim 

that the information contained herein covers all details, 
conditions or variations, nor does it provide for every possible 
contingency in connection with the installation or use of this 
product. The information contained in this document is subject 
to change without notice or obligation of any kind. Legrand 

|

 AV 

makes no representation of warranty, expressed or implied, 
regarding the information contained herein. Legrand 

|

 AV 

assumes no responsibility for accuracy, completeness or 
sufficiency of the information contained in this document.
Chief® is a registered trademark of Legrand AV Inc.

DEFINITIONS

MOUNTING SYSTEM: 

A MOUNTING SYSTEM is the 

primary Chief product to which an accessory and/or component 

is attached.

ACCESSORY: 

AN ACCESSORY is the secondary Chief 

product which is attached to a primary Chief product, and may 

have a component attached or setting on it.

COMPONENT: 

A COMPONENT is an audiovisual item 

designed to be attached or resting on an accessory or mounting 

system such as a video camera, CPU, screen, display, 

projector, etc.

WARNING:  

A WARNING alerts you to the possibility of 

serious injury or death if you do not follow the instructions.

CAUTION:  

A CAUTION alerts you to the possibility of 

damage or destruction of equipment if you do not follow the 

corresponding instructions.

 IMPORTANT SAFETY INSTRUCTIONS

WARNING:  

Failure to read, thoroughly understand, and 

follow all instructions can result in serious personal injury, 
damage to equipment, or voiding of factory warranty! It is the 
installer’s responsibility to make sure all mounting systems

 

are properly assembled and installed using the instructions 
provided.

WARNING:  

Failure to provide adequate structural strength 

for this mounting system can result in serious personal injury 
or damage to equipment! It is the installer’s responsibility to 
make sure the structure to which this mounting system is 
attached can support five times the combined weight of all 
equipment. Reinforce the structure as required before 
installing the mounting system. 

WARNING:  

Do NOT install floor kiosks and back-to-back 

floor kiosks to any surface other than concrete! Concrete 
flooring must be at least 4" in thickness and NOT be covered 
with any other type of flooring material. Concrete anchors 
must be installed directly into concrete surface.

WARNING:  

Exceeding the weight capacity can result in 

serious personal injury or damage to equipment! It is the 
installer’s responsibility to make sure the weight of 
components attached to swing door(s) does not exceed:

LF49/50/55UxP Models

: 125 lbs (56.7 kg) 

Removable storage panel capacity: 25 lbs (11.3 kg);

LF49/50/55UxP-B2B Models

:

 

125 lbs (56.7 kg) 

per 

screen

Removable storage panel capacity: 25 lbs (11.3 kg).

   The hinge-open position is for installation and service only. 

WARNING:  

Use this mounting system only for its intended 

use as described in these instructions. Do not use 
attachments not recommended by the manufacturer.

WARNING:  

Never operate this mounting system if it is 

damaged. Return the mounting system to a service center for 
examination and repair.

WARNING:  

Do not use this mounting system outdoors.

--SAVE THESE INSTRUCTIONS--

Summary of Contents for CHIEF LF49UxP





















Reviews: