LEGRAND ADMHRM4, User Manual

Page: 13 / 21

17 16
Using adorne Wireless Lighting Dimmers, Switches, and
Plug-In Modules
Dimmers
Common Device Applications
Security Systems
Connect adorne Scene Interfaces and security systems using a two-wire connection between a maintained
or momentary output relay at the alarm panel and the desired input on the scene interface. Common
applications include switching on or flashing house lighting when an alarm event occurs or recalling a
scene when the homeowner deactivates the alarm system upon arrival.
Occupancy or Vacancy Sensor
An occupancy sensor application could use either Mode A or Mode B. Most applications would use Mode B.
In this configuration, a scene executes when the sensor initially detects motion; a second scene executes
when the sensor determines that the space is unoccupied. Mode A allows auto-on, manual-off, and
manual-on/auto-off functions. A manual-on/auto-off application requires the input to be wired to a NC
contact and the scene stored to turn the appropriate lighting off.
OPERATING THE SYSTEM EXPANDING THE SYSTEM AND INTERFACING WITH OTHER PROGRAMS
Security
Panel
Room or House
Scene Interface
24VDC Out.
(150ma max.)
Ground
Input 1
Input 2
Input 3
Power
Ground
COM
NO
2/20AWG
Motion
Sensor
Setting Default Button Operation
On/Off Tap once Fade the circuit to its last-used level
On/Off Tap twice Full bright
On/Off Press and hold Fade the circuit to off
+ or upper-right Tap once From Off, fade the circuit to its last-used level
+ or upper-right Tap once From On, increase level 2% per tap
+ or upper-right Tap twice From Off, full bright
+ or upper-right Tap twice From On, increase level 4%
+ or upper-right Press and hold Continually increase the light level
- or lower-right Tap once Decrease level by 2% per tap
- or lower-right Tap twice Decrease level by 4%
- or lower-right Press and hold Continually decrease the light level
Setting Default Button Operation
On/Off Tap once From Off, turn circuit on
On/Off Tap once From On, turn circuit off
Switches
Setting Default Button Operation
Tap once Fade the circuit to its last-used level
Tap twice Full bright
Press and hold Continually increase the light level
Tap once Fades the circuit to off
Press and hold Continually decrease the light level
Plug-in Lamp Modules
Setting Default Button Operation
Tap once Turn circuit on
Press and hold Turn circuit on
Tap once Turn circuit off
Press and hold Turn circuit off
Plug-in Appliance Modules