17
Caution
When clearing the settings of one or all the control ke
y
s, this ke
y
is (these ke
y
s are) reset. This means that ke
y
s reset in
this wa
y
move
b
ack to ra
d
io me
d
ia.
Remem
b
er the restart the “
Procedure for choice of media on a control key
”
d
escri
b
e
d
on page 14 if
y
o
u
want to
control infrare
d
pro
du
cts.
���
���
���
���
Clearing a scenario (on the TRANSMITTER)
Press LEARN
The scenario is cleare
d
Press the control
bu
tton
an
d
hol
d
d
own for 10 s
Clear all scenarios linke
d
to the control
bu
tton
Press LEARN
The pro
du
ct ret
u
rns
to factor
y
settings
Press LEARN an
d
hol
d
d
own for 10 s
Clear all scenarios linke
d
to this pro
du
ct
5 s
5 s
18
Troubleshooting
Proble
m
Cause
Solution
During learning, the Learn indicator
goes off 10 minutes after the start of
the learning procedure.
The learning procedure terminates
after 10 minutes if no control key is
pressed.
Restart learning.
During learning on the receiver, the
receiver's Learn indicator stays on
steadily for 5 seconds.
The transmitter which initiated the
learn procedure is not compatible
with the receiver.
Perform learning between mutually
compatible products.
During learning, the receiver's Learn
indicators goes off where if had been
blinking slowly, but the 10 minutes
deadline has not yet been reached.
Pressing the control key on the
receiver should be done within one
minute of pressing the Learn key
on the receiver.
Press the Learn key and continue the
learning procedure by pressing a
control key within less than one
minute.
After pressing the Learn key, pressing
the control key does not produce a
fast blink on the transmitter.
The learn key is off.
The learning procedure terminates
after 1 minute if no control key on
the transmitter is pressed after
pressing the Learn key.
Restart learning.
