43
Refer to the following sheet for detailed information
Parameter
Function
Ethernet
Select the network card first.
Port 1 is the ethernet port.
Port 2 is the wireless port (if available).
DHCP
Dynamically get IP address. Get the device IP adress from the server if this
function is enabled.
Device Name
Device ID in the network.
TCP Port
Default value is 37777.
HTTP Port
Default value is 80.
UDP Port
Default value is 37778.
DNS
Manually set IP address of DNS.
You need to enable this function if you are inputting the domain name in some
items. Otherwise the system can not parse the domain name.
Alternative DNS
Max Connection
Simultaneously, network users max amount. The value ranges from 1 to 10.
Network
transmission
QoS
Set the priority between fluency and video quality or self-adaptive.
System can automatically adjust the bit stream or lower the resolution according
to the network bandwidth.
Advance interface
Parameter
Function
Remote
Host
Multiple
cast
group
- Set MULTICAST address and port.
- Enable function.
- Current series IPC does not support this function right now.
PPPOE
- Input the PPPoE user name and password you get from the IPS (internet
service provider) and enable PPPoE function. Save current setup and reboot
the device to get the setup activated.
- Device connects to the internet via PPPoE after reboot. Get the IP address
in the WAN from the IP address column.
Summary of Contents for 4 360 61
