17
4.1.5 Remove SD card
Follow the steps listed below to remove SD card.
1- Use the screwdriver to loosen the screw of SD card protection cap in the rear panel. Remove the cap from the camera.
2- Follow the SD card direction to remove the SD card.
3- Insert the SD card protection cap.
4- Use the screwdriver to fix the screw to secure the protection cap.
4.1.6 I/O Port
1
2
1
Install Cable
Follow the steps listed below to install the cable.
- Use the small slotted screwdriver to press the corresponding button of cable groove.
- Insert the cable into the groove and then release the screwdriver.
2
Remove Cable
Follow the steps listed below to remove the cable.
- Use the small slotted screwdriver to press the corresponding button of cable groove.
- Remove the cable out of the groove and then release the screwdriver.
Summary of Contents for 4 360 61
