17
Buttons
Add: After you set the decode channel, IP address etc, please click the add button, the device information will be added to the
list on the right panel (Please note it has not been saved in the device.)
Delete: Select an item in the list and then click the button to remove. Please note you need to click save button to complete
the operation (That is to say, you need to click save button to remove the information in the device.)
Modify: Double click an item in the list you can modify the device information. Click modify button to save current modification.
Please note current information has not been saved in the device.
Delete all: Click it to remove all device information in the list. It is to clear all decode tour setups.
Save: Click it to save the setup on the right panel to the device.
Search: Click it to search the tour setup information of corresponding decode channel.
Start: Click it to begin the decode tour of the specified channel.
Stop: Click it to stop the decode tour setup of the specified channel.
Pause: Click it to pause tour. Current tour will be displayed in the channel all the long.
Resume: Click it to resume tour. The tour gets activated and then begins from the next tour setup.
Export: Export all tour setups of the device.
Import: Import all tour setups of the device.
Setup steps
:
1.
Set the parameters of decode channel, such as IP and channel, then click “add”, the device info will be added into the list o n
the right.
2. Clic
k “save” to save those to the device.
3.
Click “start” to start the decode tour of the chosen channel.
3.4.6
Decode strategy
Set the delay time of decoder in each decode channel, the buffer time is ms.
Parameters
Explanation
Channel number
Channel 1-28 are available
decoding buffer time
Selectable range: 80~480