12
3.3.1
Decode Channel Information
Single click and choose any decode channel to connect real-time decode output.
1. Front-end device IP address.
2. Front-end real-time monitor channel.
3. The real-monitor channel connection status between the decoder and the front-end.
4. It is a button to control the connection between the decoder and the front-end.
3.3.2
Decode Channel Setup
Please select the output TV and position and then select the device channel in the device list. Double click channel name or drag the
channel name to the destination position and then release, you can see system pops up a dialogue box to inform that your setup is
valid.
3.3.3
Add /Remove Front-end Device
Add device
Click the add device button in the main window. System pops up the following dialogue box.
After inputting the corresponding information, please click OK button. You can see the device begins to connect the newly added front-
end device.
Once the connection is OK, you can see the channel information in section 3.
Delete Device
Select one front-end device and then click delete device button, system can remove it from the list.