54
3 - Time display:
You can select to display time or not when system is playback.
4 - Channel display: You can select to channel name or not when system is playback.
5 - Resolution:
Four options are available: 1920x1024, 1280x1024 (default), 1280x720, 1024x768.
Make sure your monitor supports the resolution before change it.
6 - Enable Tour:
Activate tour function.
In tour mode, you can see the following interface.
On the right corner, right click on it with the mouse or click on the “Shift” button
(front panel or remote control), you can stop the tour
or start it again
.
7 - Interval:
System supports 1 / 4 / 8 / 9 / 16-window tour. Input proper interval value here.
The value ranges from 5-120 seconds.
8 - Motion tour type: When the system detects a motion the defined and activated tour in Detect menu begins.
9 - Alarm tour type: When the system detects an alarm the defined and activated tour in Alarm menu begins
Please highlight icon
to select the corresponding function.
After completing all the settings, click on the “Save” button, sthe ystem goes back to the previous menu.
5.5.10 Default
Click on the “DEFAULT” icon, system pops up a dialogue box. You can highlight
to restore default factory setup.
You can “Select all” settings or select menu by menu, General, Encode, Schedule, RS232, Network, Alarm, Detect, Pan / tilt
/ zoom, Display and Channel name.
After all the setups please click on the “Save” button, system goes back to the previous menu.
Warning!
System menu color, language, time display mode, video format, IP address, user account will not maintain previous setup
after default operation!
