31
Preset
Preset Setup
1 - Use eight direction arrows to adjust camera to the proper position.
2 - Click on the “Set” button in the interface below and enter the preset number you want.
3 - The system saves the speed dome position and the preset number when you click on the “Set” button.
You can set the following items:
•
Preset : Max 127 positions can be stored as “Preset” position.
The “Preset” number can be assigned from 1 to 128, but 95 is reserved for starting OSD menu.
•
Tour => not available
•
Pattern => not available
•
Border => not available
Activate Preset
Click on the “Page Switch “, you can see the interface below, input preset number in the “No.” blank, and click on the “Pre-
set” button. The speed dome goes to the preset number.
Note:
The “Tour” (Patrol) and the “Pattern” buttons are not available in the auxiliary menu. You can set them using the reserved
Preset through the OSD menu of the speed dome. You need to refer the user’s manual speed dome.
You can define them as you require.
