8
D
ay & Night Output
This function will turn on the external IR LED lamp according to the position of IR cut filter.
5V/10 mA: IR LED ON (night)
0V: IR led off (Day)
Day & Night external input
When Day & Night mode is set to “External” on the OSD menu of the camera, this function will be
switched to Day mode or Night mode according to the Day & Night signal from the external light sensor
or the IR Led Lamp.
Open contact: Day
Close contact: (close to GND): Night
- Camera Control
2.4K / 4.8K / 9.6K / 19.2k / BPS (please refer to OSD setup
menu)
Optional: RS-422/RS-485.
Name
Function
R+, R-, T+, T-
Use for RS-422/RS-485 control
