background image

14

8.1 Digital zoom operation

The built-in 36x optical zoom lens is highly reliable and offfers auto focus and auto iris functions. 
Users can monitor a scene from any desired angle of view, use   (T)/   (W) button to control the optical zoom 
1x ~ 36x and digital zoom 1x ~ 16x.

8.2 OSD (On Screen Display) main menu description
8.2.1 Main Menu Display

MAIN MENU

FOCUS

<-->

EXPOSURE

<-->

DAY/NIGHT

<-->

WHITE BALANCE

<-->

PRIVACY MASK

<-->

EFFECT

<-->

MOTION DETECT

<-->

COMMUNICATION

<-->

DEFAULT

<-->

RETURN

ON 

8.2.2 Main Menu Setup

- In order to display the setup menu on the screen, set the menu command or press the button panel.
- Use   (T)/   (W) control buttons to select each item.
- Use   (-)/   (+) control buttons to change the data.
- Use Menu Control button to Enter/Exit the menu display.

8.3 Sub Menu description
8.3.1 Focus setup

FOCUS

FOCUS MODE

PUSH AUTO

DISTANCE

1.5 M

ZOOM START

X1

ZOOM END

X576

ZOOM SPEED

HIGH

TRACKING MODE

AUTO

DEFAULT

ON

RETURN

FOCUS MODE SET:

This function is for focus mode setting.

Set the mode to Auto, Manual, or 

Push Auto.

Note: 

Auto:  

 

Select auto mode to enable automatic adjustment of the focus position.

Push Auto:  

Select push auto to adjust focus position TELE or WIDE, the preset value 

   

 

becomes that for AF mode and returns to Manual Focus mode.

FOCUS DISTANCE SET:

This function is for selection of minimum shooting distance.

Set the focus distance mode to 10 cm, 50 cm, 1 m, 

1.5 m

, 3 m, 5 m or 10 m.

8. SYSTEM SETUP

Summary of Contents for 4 305 34






















Reviews: