5
Item 288 12 is a programmable electronic device capable of controlling 6 relay outputs. The device can work in three different ways, depending on
the product it is associated to, or if used as with supervision system device. Communication is ensured by the Modbus protocol.
Description
1
Power supply 24 Vac/dc
2
Power supply 24 Vac/dc
Note:
Use power supplies with double insulation, or similar
-
Tx/Rx RS485
+
Tx/Rx RS485
SG
Signal mass
DPX connection port
Warning
:
do not connect to a PC
6 NO relay outputs with 230 V, 8 A contacts
Input/output
RL1
÷ RL6
RS-485
24
Vac/Vdc
- TX LED flashing and RX LED ON: Initialization and reading of configurators
- RX LED flashing and TX LED ON: Waiting for instructions
- Both TX and RX LEDs flashing at the same time: Application code missing
- TX and RX LEDs flashing in alternation: Performing flash type cancellation
- TX LED ON: Transmitting
- RX LED ON: Receiving
During execution:
- Both TX and RX LEDs ON at the same time: Initialization and reading of configurators
- Both TX and RX LEDs flashing at the same time: Receiving control
- Both TX and RX LEDs OFF: Communication missing
The red LEDs associated to the relays turns on and off based on the closed/open status of the corresponding relays.
Notifications
DPX
1-2-3-4
288 12
24V
RL4
RL5
RL6
RL1
RL2
RL3
ON
TX
RX
1 2 +
SG
--
24V
RS485/DMX
3
1 2 3 4
DPX
A1 A2 A3 M B F
