background image

1/7

Technical data sheet: S000072383EN-2 

Updated: 17/10/2017 

Created: 04/10/2012

Catalogue number(s): 0 488 17

Corridor sensor - PIR

  1. USE

This device is used to control a light source automatically

by detecting movement in a monitored area.

Motion sensor with detection angle of 2 x 12 m.

Detection type: infrared (PIR)

Mounting type: ceiling

  2. TECHNICAL CHARACTERISTICS

Voltage: 100 - 240 V~

Frequency: 50/60 Hz

No-load power consumption: 0.2 W

Output via normally open contact connected to the phase

Wiring: 2 x 2.5 mm

2

Drilling diameter:  65 mm without flush-mounting box 

68 mm with flush-mounting box

Weight: 114 g

Impact resistance: IK04

Penetration by solid and liquid matter: IP41 installed product.

Usage temperature: - 5°C to + 45°C

Storage temperature: - 20°C to + 70°C

   2.  TECHNICAL CHARACTERISTICS (continued)

Cover removed

CONTENTS Page

1. Use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1

2. Technical characteristics  . . . . . . . . . . . . . . . .1

3. Dimensions. . . . . . . . . . . . . . . . . . . . . . . . . . . . .2

4. Connection . . . . . . . . . . . . . . . . .   . . . . . . . . . .2

5. Installation . . . . . . . . . . . . . . . . . . . .  . . . . . . . .4

6. Removal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4

7. Operation  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5

8. Settings  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6

9. Performance . . . . . . . . . . . . . . . . . .   . . . . . . . .7

10. Care . . . . . . . . . . . . . . . . . . . . .   . . . . . . . . . . . .7

11. Standards and approvals . . . . . . . . . . . . . . . .7

12. Troubleshooting  . . . . . . . . . . . . . . . . . . . . . . . .7

230 V~ 2000 W

8.5 A

1000 VA

4.3 A

10x(2x36 W)

4.3 A

500 VA

2.1 A

1000 VA

4.3 A

500 VA

2.1 A I max. ≤ 2A

110 V~ 1000 W

500 VA

5x(2x36 W)

250 VA

500 VA

250 VA

1 - Halogen bulb
2 -  ELV halogen bulb with separate electronic ballast
3 -  ELV halogen bulb with separate ferromagnetic ballast
4 - Fluorescent tube with separate ferromagnetic ballast
5 -   ELV fluorescent tube with separate electronic ballast

1

2

3

4

5

6

7

8

9

6 -  Compact fluorescent bulb with built-in electronic ballast
7 -  Compact fluorescent bulb with separate ferromagnetic ballast
8 - Compact fluorescent bulb with separate electronic ballast
9 - LED bulb
10 - Contactor

LEARN 

LED

IR LED

Sensor/ 

PIR sensor

LEARN

Summary of Contents for 0 488 17








Reviews: