6/11
Technical data sheet: S000094312EN-1
Updated:
Created: 20/09/2017
Cat. No(s): 0 026 54
KNX modular dimmer 2 x 300 W
7. COMMUNICATION OBJECTS
7.1 List of objects
The following communication objects are available for each channel.
7.2 "General” parameter
"Disable NFC modification"
No: Parameter modification using NFC is active
Yes: Parameters modified with NFC will not be saved
"Use error objects"
No: Errors are not identified
Yes: Errors relating to objects are listed
"Use work time object”
No: Objects relating to duration do not appear
Yes: Objects relating to work time are listed
7.3 Channel 1 and 2 parameters
7.3.1 "General” parameters
Parameter
Default values
Possible values
Description
On time
1 s
1 s - 1 H
Time taken to go from 0 to 100%
when the control unit receives
an ON command
Dimming
time
4 s
1 s - 1 H
Time taken to go from 0 to 100%
when the control unit receives a
dimming command
OFF time
2 s
1 s - 1 H
Time taken to go from 100% to
0 when the control unit receives
an OFF command
Level time
1 s
1 s - 1 H
Time taken to go from 0 to 100%
when the control unit receives a
level command
7. COMMUNICATION OBJECTS
(continued)
7.3 Channel 1 and 2 parameters (continued)
7.3.2 "Use timer” parameter
No: The function is not accessible
Yes: The timer function is available
"Maintain time"
Not active (infinite) (default value)
1s…24h
"Maintain level"
85…
"Use standby"
No/Yes
7.3.3 "Use scenes" parameter
No: The function is not accessible
Yes: The scenes function is available
For each scene, the following parameters are accessible
"Number (0: not used)"
1 (default value), the scene number can be between 1 and 64
"Level %"
20 (default value), the value of the level varies between 1 and 100
"Change scene time"
2s (default value), this value can vary from 1 s to 1 H
"Active save"
No (by default)
Yes: saves the scene level
7.3.4 "Behaviour on power on” parameter
Behaviour on power on
Last state (default value): state before the failure
Always On
Always Off
