background image

Sleep Comfort™ Adjustable Base Owners Manual 99301076-b

22

sleep comfort

 warranty

Sleep Comfort™ Adjustable Beds (SC) warrants for life the entire bed against defects in material or 
workmanship. 

warranty - 

Parts

If a part needs replacement, the purchaser 
must return the part to SC freight prepaid. 
SC will, at its option, repair or replace the 
defective parts or components. SC will return 
the repaired or replaced parts to the purchaser 
freight collect. SC shall not be responsible or 
obligated to pay for any costs or expenses for 
examination, removal and/or installation of any 
warranted part or to pay cost of transportation, 
handling and packaging of the parts, 
components or beds to or from SC.

warranty - 

Service

For the first year following the original purchase 
date by the original purchaser, there will be 
no charge for a service technician should a 
technician be required to service the bed 
foundation in the customer’s home. This in-
home service is provided at no charge for the 
first year only for all parts and components 
excluding the mattresses. Mattresses which 
need repairing or replacing during the first year 
must be returned freight prepaid. This service 
warranty does not include costs for unnecessary 
service calls; i.e. in-home service calls solely 
for the purpose of educating the purchaser 
about the product or finding unsatisfactory 
power connections. This service warranty is 
valid only in the U.S. and does not include 
U.S. Territories.

warranty - 

Miscellaneous

This warranty does not include warranted 
parts that have been subjected to misuse or 
improper service by the purchaser, or that have 
been damaged in transit or handling, and/or 
have been altered or repaired by unauthorized 
representatives. Proof of Purchase is required.

The foregoing are express warranties on the 
terms set forth for the above and are the only 
warranties applicable to this product—all 
other warranties being expressly denied. Sleep 
Comfort™ Adjustable Beds shall not be liable 
for any incidental or consequential damage or 
for any other damage or for any other damage 
or loss not expressly assumed as set forth 
herein.

warranty information

Sleep Comfort Adjustable Beds

15950 Bernardo Center Drive, Ste. C

San Diego, CA 92127

800-501-3433

Email: [email protected]

Summary of Contents for Sleep Comfort

























Reviews: