Leggett & Platt Sleep Comfort, Owner'S Manual

Page: 14 / 24

Sleep Comfort™ Adjustable Base Owners Manual 99301076-b
14
sc-mr2 remote controL Programming
(1 remote control - 1 base)
The two step procedure below is required to program 1 remote control to operate 1 base.
Before beginning, make certain the base is plugged into a working grounded electrical outlet.
If
programming fails, initiate the programming procedure a second time.
steP 1
Locate the receiver unit (power down box)
for the base and press the learn button for 1
second and release (
FIGURE 7 ) .
POS 1
BUTTON
HEAD
MASSAGE
ON/OFF
BUTTON
TRANSMISSION
INDICATOR LIGHT
FIGURE 8
steP 2
On the remote control, simultaneously press and
hold the
PoS 1 and head massage on/off buttons .
The transmission indicator light will flash slowly
and then flash rapidly to indicate programming
mode. Continue to hold for 5 seconds and then
release the buttons ( FIGURE 8 ).
One remote control is now programmed to
operate one base.
POWER
DOWN BOx
LEARN
BUTTON
FIGURE 7: Power down box learn button.