Y-120 K/CK Adjustable Base Owners Manual 290-0089
17
CONTROL BOX
CONNECTION CORD
CONNECTED TO
POWER DOWN DEVICE
FIGURE 11
STEP 6
Press the FLAT BUTTON on the remote control until the base is in
the flat position. BASE WILL MOVE TO THE FLAT POSITION VERY
SLOWLY.
Note: Batteries in the power down device will only work for
one use, then will need to be replaced.
STEP 7
Reconnect control box connection cord to power supply “brick” and
plug main power cord into electrical power source (
FIGURE 12
).
When power is restored from outage, base is ready to resume normal operation.
ELECTRICAL
POWER
SOURCE
MAIN
POWER
CORD
FIGURE 12
POWER DOWN OPERATION
