Leggett & Platt Falcon 2.0 Foldable Owner'S Manual Download Page 11

Page: 11 / 21

Y-120 K/CK Adjustable Base Owners Manual 290-0089

STEP 1

UNPLUG

both bases from the electrical power

source (if plugged in) and wait 3 minutes.

STEP 2

Plug

both bases

into the electrical power source.

You now have 3 minutes to complete the
programming procedure. The programming indicator
(under bed light) will flash to indicate programming
mode.

STEP 3

Simultaneously press and hold the

head up

and

foot

buttons on the remote control for 2 seconds.

Release both buttons.

Press the

flat

button, then the

head up

foot

button on the remote control to verify base

functions.

One remote control is now programmed to operate
two bases.

Note: The second remote is not needed. Store it for

use as a spare.

REMOTE CONTROL PROGRAMMING

Program One Remote to Operate One Base

- Bases

are factory programmed to operate as one remote
control to one base. If reprogramming is required,
perform the following numbered procedure.

programming fails, initiate the programming

procedure a second time.

Program One Remote to Operate Two Bases

- Bases

are factory programmed to operate individual
bases. To program one remote to operate both
bases, perform the following numbered procedure.

If programming fails, initiate the programming

procedure a second time.

BASE 1

BASE 2

STEP 1

UNPLUG

the base from the electrical power source

(if plugged in) and wait 3 minutes.

STEP 2

Plug the base into the electrical power source.

You now have 3 minutes to complete the
programming procedure. The programming indicator
(under bed light) will flash to indicate programming
mode.

STEP 3

Simultaneously press and hold the

head up

and

foot

buttons on the remote control for 2 seconds.

Release both buttons.

Press the

flat

button, then the

head up

foot

button on the remote control to verify base

functions.

One remote control is now programmed to operate
one base.

Summary of Contents for Falcon 2.0 Foldable






















Search results

Summary of Contents for Falcon 2.0 Foldable

Reviews:

Related manuals for Falcon 2.0 Foldable

Brands by name

Popular brands

Leggett & Platt Falcon 2.0 Foldable, Owner'S Manual

Search results

Summary of Contents for Falcon 2.0 Foldable

Reviews:

Related manuals for Falcon 2.0 Foldable

Brands by name

Popular brands