Leggero DYNO User Manual Download Page 15 | Manualshive

Page: 15 / 22

Leggero DYNO User Manual Download Page 15

DYNO

User Manual

Page 15

4.7 Folding and Unfolding

Chairs Equipped with Activator Dynamic Seating Option

1.  Engage wheel locks.
2.  Place hands on handlebar.
3.  Adjust chair to hip angle unlocked (Activator

Dynamic) position.

4. Using foot, push down on top of hip angle lock

mechanism.

5. Push handlebar forward and down.
6.

Adjust handlebar forward to achieve lowest profile.

7. To unfold, pull back on handlebar.

4.8 Folding and Unfolding

Chairs NOT Equipped with Activator Dynamic Seating Option

1.  Engage wheel locks.
2.  Place hands on handlebar.
3.  Using foot, push down on top of hip angle lock bar.
4.  Push handlebar forward and down.
5.

Adjust handlebar forward to achieve lowest profile.

6. To unfold, pull back on handlebar.

WARNING!

When folding or unfolding, keep arms,

hands, and feet clear of moving components to avoid injury.

Reference Figure 11, arrows indicate potential pinch points.

Pull Back on

Handlebar to Unfold

Push down on top of

mechanism with foot

Push Forward on

Handlebar

Dyno in Folded

Position

Figure 11

Figure 12

Figure 13

Push Down

Here to Fold

Push Down

Here to Fold

«
...
13
14
15
16
17
...
»

Summary of Contents for DYNO























Reviews:

No comments