DYNO
User Manual
Page 12
Section 4: Operation and Adjustment
Tools Required:
4mm Hex Wrench
10mm Wrench
4.1 Wheel Lock Operation
1. To engage wheel locks, pull up on center
of crossbar with foot. Reference Figure 2.
2. Verify wheel locks are engaged on each
side by trying to move chair front to back.
3. To disengage wheel locks, push down on
center of crossbar with foot. Reference
Figure 3.
Figure 2
5mm Hex Wrench
To Engage
Pull Up
To Disengage
Push Down
Figure 3