DYNO
User Manual
Page 14
4.5 Hip Angle Adjustment & Activator
Dynamic Seating Mode
Chairs Equipped with Activator Dynamic Seating Option
1. Engage wheel locks.
2. Place both hands on handlebar.
3. To lock hip angle in 90° position, push handlebar as far
forward as possible.
4. To lock hip angle in 120° position, pull handlebar as far
rearward as possible.
5. Hold handlebar position, using foot pull upward on hip
angle lock mechanism. Reference Figure 8.
6. Verify that hip angle position is locked by lightly pushing
and pulling on handlebar.
7. To return to unlocked Activator Dynamic Seating mode,
push down mechanism until it clicks in place. Notch will
be aligned with rear axle tube as shown in Figure 8.
Figure 8, Hip Angle Unlocked
4.6 Hip Angle Adjustment
Chairs NOT Equipped with Activator Dynamic Seating Option
1. Engage wheel locks.
2. Place both hands on handlebar.
3. Using foot, push downward on hip angle lock bar.
Reference Figure 10.
4. Adjust hip angle to desired position.
5. Release bar.
6. Verify that hip angle position is locked by lightly pushing
and pulling on handlebar.
Figure 10
Figure 9, Hip Angle Locked