leg&go BABY BIKE, Assembly Manual

Page: 8 / 31

13 12
FOR THE VIDEO MANUAL, GO TO:
www.legandgo.com/manual1
1.4. How to assemble
the
Balance Bike
1 Remove the big lobe knob
from the front fork by turning
it counter-clockwise.
2 Place the handlebar atop the front
fork and fasten it with 2 furniture
screws using the Allen key (provided
in the Accessories bag).
3 Place the front fork, seat mount and
frame as shown. The default setting:
seat mount: 3rd/4th bore from the
bottom, main frame: 2nd bore from the
bottom.
If this setting is not suitable for your
child, see pages 18-22 for tips on how to
adjust the proper bike height and size.
4 IMPORTANT! Both rear wheel lobe
knobs have to be in the middle bores.
1
2
3
4
1.5. How to assemble
the
Bouncy Bike
FOR THE VIDEO MANUAL, GO TO:
www.legandgo.com/manual2
1 Disassemble your Balance Bike
by removing the big lobe knob.
2 Rotate the main frame by turning
it upside-down (see image).
3 Fasten the seat mount and frame
back to the front fork with the
previously removed lobe knob. The
default setting:
seat mount: 3rd/4th
bore from the bottom, main frame:
3rd bore from the bottom.
If this setting is not suitable for your
child, see pages 18-22 for tips on how to
adjust the proper bike height and size.
4 IMPORTANT! Both rear wheel lobe
knobs have to be in the middle bores.
1
2
3
4