leg&go BABY BIKE, Assembly Manual

Page: 26 / 31

49 48
6.3. How to transform
your
Balance Bike 3in1
into Tricycle
A) You already have an assembled Balance Bike 3in1
Disassemble your Balance Bike by removing the big lobe knob
holding the main frame, seat mount and front fork together. Remove the
12” rear wheel from the main frame (hold on to the lobe knobs!).
B) Your Balance Bike 3in1 is still in the box
Locate the main frame in the Balance Bike 3in1 box.
Remove the 12” rear wheel from the main frame (hold on to the lobe knobs!).
A
B
1 Use the Allen key to loosely attach
the pedal mount to the main
frame
with the 3 furniture screws
(provided in the Accessories bag).
IMPORTANT! Do not tighten the
screws yet — the pedal attachment
should slide freely up to 1.5 cm.
2
For easier assembly, place
the rear cargo box and main
frame upside down.
3 Attach the rear cargo box to the
main frame with the 2 lobe knobs
that were used previously for the
Balance Bike rear wheel. Make
sure to
place the lobe knobs in the
middle bores of the main frame.
1
2
3
1.5 c
m
FOR THE VIDEO MANUAL, GO TO:
www.legandgo.com/manual8