leg&go BABY BIKE, Assembly Manual

Page: 27 / 31

51 50
4 Place the belt on both gears.
If you cannot get the belt in its place,
loosen the 3 screws attaching the
pedal mount to the main frame
until the pedal attachment slides
freely (see step 1, page 49).
5 Gently pull the pedal attachment
away from the rear wheels until the
belt is taut
(do not strain it!). Hold the
pedal mount in place until you have
tightly fastened the 3 fixture screws
of the main frame with the Allen key.
Check if the wheels and belt are
spinning freely and smoothly.
IMPORTANT! If the belt is not taut
enough, it will skip sprockets
while
pedalling fast or pedalling in standing
position. Appropriate belt tension
ensures comfortable riding.
6 Place the front fork, seat mount and
frame as shown. The default setting:
seat mount: 3rd/4th bore from the
bottom, main frame: 2nd bore from
the bottom.
Tightly fasten with the
previously removed lobe knob.
If this setting is not suitable for your
child, see pages 18-22 for tips on how to
adjust the proper bike height and size.
4
5
6
!
MAINTENANCE
&
USE OF
LEG&GO
BIKE
51