8
6
5
7
A
5
Installation Procedure
Steps 5-8
Lefroy Brooks always recommends that plumbing products be installed by a licensed professional.
Shut off main water supply before installation.
5
Take out the stopper.
6
Turn on the flow controller. Turn the thermostatic cartridge until the water temperature is at 38.
Suggestion: attach a hose to the outlet and guide water to basin or a receiver to get the
temperature and prevent it from wetting the floor.
7
Fit the stopper and make sure its “A” plane as shown is horizontal and on the left side.
8
Install sleeve.
