lefeirc SN-L Sinan, Instructions Manual

Page: 3 / 19

1
Introduction
Thank you for purchasing the LEFEIRC SN-L Sinan.
Setup
1. Use double sided tape to mount FC as close as possible to model’s COG.
2. Use provided leads to connect parts.
Port T-Tail V-Tail Wing
RSSI RCRX RSSI RCRX RSSI RCRX RSSI
PPM RCRX PPM/SBUS RCRX PPM/SBUS RCRX PPM/SBUS
AUX 1 TBA TBA TBA
AUX 2 TBA TBA TBA
AIL Aileron Aileron Elevon
ELE Elevator Ruddervator Elevon
THR ESC ESC ESC
RUD Rudder Ruddervator N/A
GPS GPS GPS GPS
PMU PMU 3S - 6S PMU 3S - 6S PMU 3S - 6S
CAM 9V (Black/Red/White) CAM 9V (Black/Red/White) CAM 9V (Black/Red/White)
VTX 9V (Black/Red/Yellow) VTX 9V (Black/Red/Yellow) VTX 9V (Black/Red/Yellow)
3. Configure RCTX with no dual rates, expo, mixes, reversing or trim.
AIL CH1
ELE CH2
THR CH3
RUD CH4
3PS (Master) CH5
2PS/3PS (Slave) CH6
4. Power on RCTX then model. The FC should enter CAL RC (see BASE FUNCTION > CAL RC).
5. Toggle 3PS (Master) twice to enter settings. Use AIL and ELE to navigate and adjust.
6. Power cycle and you’re good to go!