10
The FHP Series PCM Adder Board accepts a 0 - 5 VDC,
0 - 10 VDC, or 4-20 mA signal and outputs an isolated 0-5
VDC signal without requiring additional panel space. It
mounts directly over the main AC board (bottom board) thus
maintaining the same footprint. Step-by-step information for
mounting the PCM Adder Board to a FHP Series drive is
shown on pages 12 - 14.
Figure 10 (page 11) shows a FHP Series drive with the PCM
adder board installed on the unit and the parts supplied in the
PCM adder kit.
175324 Process Control Module (PCM) Mounting
Installation
