Tamper switch is
triggered
Not in the network:
Notification report will be sent after the next network
access.
This product can be operated in any Z-Wave network with other Z-Wave certified devices from other manufacturers. All
mains operated nodes within the network will act as repeaters regardless of vendor to increase reliability of the network.
5
Functions
After the installation, you can easily control the system using the keypad.
Arm stay/Arm away/Disarm the system by press the mode button followed by your PIN code and press the confirm
button. The PIN code is consisted of 6 digits and can be modified in the App.
Press the Emergency button and hold for 3 seconds and release to send a panic signal.
Deactivate a panic event by pressing the disarm button followed by your PIN code.
Faulted sensor:
If there is a faulted sensor when arming the system, you will need to press the confirm (
√
) button again to “force arm”
the system.
Firmware upgrade:
When there is new version of firmware for the device available, you will get a notification in the App. Then you can
decide whether to upgrade.
Hub
