Power indication and charging:
To replace action buttons:
Yellow
LB
LT
RB
RT
Y
B
X
A
Orange
Green
Blue
Red
Black
Brown
Purple
When the battery level of the device is low, the LED Power Indicator
Light will blink slowly. Plug the USB cable into a device with a USB
port to charge. During charging, the power indicator light will blink.
When the battery is fully charged, the light will remain on.
1. Open the storage compartment on the back of the device and
use the hex tool to remove the 7 screws from the bottom of the
device.
2. Remove the connecting cable from the underside of the
button to be replaced by pressing the tabs on both sides of
the button.
3. Insert the new button and turn it until it's tightly installed.
4. Connect the corresponding cable based on the sticker color
guide inside the internal compartment.
5. Install the bottom plate and screws back on the device.
