LeeBoy 8515D, Operation, Service & Parts Manual

Page: 20 / 398

• Never operate the engine while wearing a headset to
listen to a radio or music because it will be difficult to
hear the warning signals.
• Always start the engine and operate the controls while
seated in the operators seat.
• Always turn the start switch to the OFF position after
operation is complete and remove the key from the
switch. Keep the key in your possession when the
paver is not operating.
• Attach a “Do Not Operate” tag near the key switch
while performing maintenance on the equipment.
Alcohol and Drug Hazard
Never operate the machine while under the
influence of alcohol, drugs, or when ill.
Piercing Hazard
High-pressure hydraulic fluid or fuel can
penetrate your skin and result in serious
injury. Avoid skin contact with high-pressure
hydraulic fluid or diesel fuel spray caused by
a hydraulic or fuel system leak such as a
broken hydraulic hose or fuel injection line.
• If you are exposed to high-pressure hydraulic fluid or
fuel spray, obtain prompt medical treatment.
• Never check for a hydraulic fluid or fuel leak with your
hands. Always use a piece of wood or cardboard.
Have your authorized LeeBoy dealer or distributor
repair the damaged parts.
Flying Object Hazard
Always wear eye protection when cleaning
the machine with compressed air or high-
pressure water.
Dust, flying debris, compressed air,
pressurized water or steam may cause eye
injury.
Coolant Hazard
Coolant must be handled properly to ensure
operator safety.
• Wear eye protection and rubber gloves when handling
engine coolant.
• If contact with the eyes occurs, flush eyes with clean
water for 15 minutes.
• If contact with skin occurs, wash immediately with
soap and clean water.
Burn Hazard
Some of the machine’s surfaces become
very hot during operation and shortly after
shutdown.
• Keep hands and other body parts away from hot
machine surfaces.
• Handle hot components with heat-resistant gloves.
The safety messages that follow have CAUTION level
hazards.
Poor Lighting Hazard
The work area must be well lit to ensure safe and proper
operation.
• Ensure that the work area is adequately illuminated.
• Always install wire cages on portable safety lights.
Tool Hazard
Always use tools appropriate for the task at hand and
use the correct size tool for loosening or tightening
LeeBoy machine parts.
Safety
LeeBoy 8515D Conveyor Paver 1-6