FRONT PANEL CONTROLS
1)
INPUT
instrument jack (Right side)
2)
OUTPUT
jack (Left side)
3)
TONE
control
4)
TONE SWITCH
5)
GAIN
control
6)
DISTORTION SWITCH
7)
POWER
connector - 2.1 mm Center Tip Ground - +9 vdc
8)
LED
light
9)
FOOTSWITCH
switch
INPUT JACK
provides input to the Platinum Distortion amplifier.
OUTPUTJACK
provides output to an effects chain or amplifier.
TONE
adjusts the overall frequency response of the pedal.
In the middle it is close to a flat response, turning it left increases highs,
And turning it right increases low's.
TONE
SWITCH
turns the tone control on and off,
Every pedal that has a tone circuit, limits some of the frequencies when used.
By bypasses it you can allow the full frequency of your instrument to pass through.
GAIN
adjusts the signal strength coming out of the instrument, and going into the first
Dsitortion stage.
DISTORTION SWITCH
Has three positions, in the middle it is off and allows the second
distortion stage to operate cleaner.
Position 1 and Position 2 are completely different styles of distortion, and by activating them
you can get sounds from smooth singing distortion to full Metal Meltdown.
OUTPUT (MASTER)
sets the master volume of that channel
