Ledj Stage Par CZ200 Dual White, User Manual

Page: 7 / 12

www.prolight.co.uk Stage Par CZ200 Dual White User Manual
7
Operating instructions
No DMX signal:
To change how the unit responds when the DMX signal is lost, press the “MENU” button and use the
“UP” and “DOWN” buttons to show
dNSt
on the LED display. Now press the “ENTER” button and
use the “UP” and “DOWN” buttons to choose between
LAst
(Hold the last DMX command) or
bLNd
(Blackout). Press the “ENTER” button to confirm the setting.
To exit out of any of the above options, press the “MENU” button.
Dimming curves:
To access the dimming curve setting, press the “MENU” button to show
CUrV
on the LED display.
Now press the “ENTER” button and use the “UP” and “DOWN” buttons to choose between
LINE
(Linear),
SQUA
(Square),
ISQU
(Inverse square) or
SCUR
(S-Curve).
Press the “ENTER” button to confirm the setting.
To exit out of any of the above options, press the “MENU” button.
Dimming speed:
To access the dimmer speed setting, press the “MENU” button and use the “UP” and “DOWN” buttons
to show
PROF
on the LED display. Now press the “ENTER” button and use the “UP” and “DOWN”
buttons to choose between
LED
(LED) or
HALO
(Halogen).
Press the “ENTER” button to confirm the setting.
To exit out of any of the above options, press the “MENU” button.
LED backlight:
To access the LED backlight setting, press the “MENU” button and use the “UP” and “DOWN” buttons to
show
LED
on the LED display. Now press the “ENTER” button and use the “UP” and “DOWN” buttons
to choose between
ON
or
OfF
. Press the “ENTER” button to confirm the setting. To exit out of any of
the above options, press the “MENU” button.
Display invert setting:
To access the display invert setting, press the “MENU” button and use the “UP” and “DOWN” buttons to
show
DISP
on the LED display. Now press the “ENTER” button and use the “UP” and “DOWN” buttons
to choose between
dISP
or
dSIP
. Press the “ENTER” button to confirm the setting. To exit out of
any of the above options, press the “MENU” button.
Manual mode:
To access manual mode, press the “MENU” button to show
MANU
on the LED display.
Now press the “ENTER” button and use the “UP” and “DOWN” buttons to choose between
W
(Warm White dimmer),
C
(Cool White dimmer),
S
(Strobe) and
Z
(Zoom).
Press the “ENTER” button and use the “UP” and “DOWN” buttons to choose between
000
~
255
.
Press the “ENTER” button to confirm the setting.
To exit out of any of the above options, press the “MENU” button.