Overview:
Operation:
After the power is switched on, Press the
“MENU/ESC”
button to access the main menu:
DMX mode, Auto run mode, DMX channel selection mode, Preset colour mode, Sound active
mode,
Slave mode or Software mode.
• The
“MENU/ESC”
button is to access or return to the main menu.
• The
“UP”
button is to increase the value of the current setting or to scroll up through the
different modes.
• The
“DOWN”
button is to decrease the value of the current setting or to scroll down through the
different modes.
• The
“ENTER”
button is to access each mode.
DMX mode:
To control the Octoblox via your DMX controller, press the
“MENU/ESC”
button until
“Addr”
, is
shown on the LED display, it is now in DMX mode. Now press the
“ENTER”
button so the LED
display shows
“A001”
, this now means that the DMX address is set at 001. You can select your
DMX address by using the
“UP”
and
“DOWN”
buttons. (A001-A512)
Note:
When in this mode the first
“DOT”
on the LED display will blink continuously showing that it
is receiving DMX data. If it is not blinking it is
NOT
receiving any DMX data from the controller.
To set the unit in one of the channel modes 3/5/8/14/24 or 26 see
DMX channel selection mode
.
Auto run mode:
To set the Octoblox in Auto run, press the
“MENU/ESC”
button and use the
“UP”
and
“DOWN”
buttons until
“AUto”
is shown on the LED display. Press the
“ENTER”
button to choose from one
of the three auto run modes,
“AUt1”
,
“AUt2”
or
“AUt3”
. Now press the
“ENTER”
button a
second time and you can set the desired speed
“SP 1”
(slow) to
“SP 9”
(fast) using the
“UP”
and
“DOWN”
buttons.
Note:
In order to return to the main menu in any of the modes press the “MENU/ESC” button.
