Ledj LEDJ94 User Manual Download Page 11

Page: 11 / 12

Specifications:

DMX Channels: .................................................................................. 3/5/8/14/24 or 26 selectable

Display: ...............................................................................................4 Push button LED display

Connections: ...........................................3-Pin XLR In/Out for DMX, IEC Power In/Out sockets

Modes: ...................................................Preset colour, Auto run, Sound active, Slave and DMX

LEDs: ..........................................................384 Ultra Bright 5mm LEDs (R: 128, G: 128, B: 128)

Beam angle: ...................................................................................................................30 degrees

Power consumption: ................................................................................................................26W

Power supply: ..................................................................................................................240v

Dimensions: .....................................................................................................1061 x 70 x 115mm

Weight: ..................................................................................................................................2.0Kgs

Summary of Contents for LEDJ94












