www.prolight.co.uk
Ninja Zoom 250
User Manual
12
Colour calibration setting:
To access the colour calibration setting, press the
“MENU”
button and use the
“UP”
and
“DOWN”
buttons to show
bALA
shows on the LED display.
Now press the
“ENTER”
button and use the
“UP”
and
“DOWN”
buttons to select the colour to be
adjusted, red (
rEd
), green (
grEE
), blue (
bLUE
) and white (
UHIt
).
Press the
“ENTER”
button and use the
“UP”
and
“DOWN”
buttons to adjust between
r.125
~
r.255
.
Press the
“ENTER”
button and repeat for green (
g
), blue (
b
) and white (
U
).
Value: 125 - 255 (125 = low brightness, 255 = high brightness)
To exit out of any of the above options, press the
“MENU”
button.
Manual mode:
To access the manual mode, press the
“MENU”
button and use the
“UP”
and
“DOWN”
buttons to show
NANU
shows on the LED display. Now press the
“ENTER”
button and use the
“UP”
and
“DOWN”
buttons to select the setting to be adjusted, red (
rEd
), green (
grEE
), blue (
bLUE
), white (
UHIt
),
strobe (
StrO
), master dimmer (
dINN
) and zoom (
zOON
).
Press the
“ENTER”
button and use the
“UP”
and
“DOWN”
buttons to adjust between
r.000
~
r.255
.
Press the
“ENTER”
button and repeat for green (
g
), blue (
b
), white (
U
), strobe (
s
),
master dimmer (
d
) and zoom (
z
).
Value: 000 - 255 (000 = low brightness/no strobe/wide beam angle,
255 = high brightness/fast strobe/narrow beam angle)
To exit out of any of the above options, press the
“MENU”
button.
Auto test:
To access the fixtures auto test mode, press the
“MENU”
button and use the
“UP”
and
“DOWN”
buttons
to show
tEst
on the LED display. Now press the
“ENTER”
button to display
AUtO
.
Press the
“ENTER”
button to confirm the setting.
To exit out of any of the above options, press the
“MENU”
button.
Reset zoom motor:
To reset the zoom motor, press the
“MENU”
button and use the
“UP”
and
“DOWN”
buttons to show
ZOON
on the LED display. Now press the
“ENTER”
button and use the
“UP”
and
“DOWN”
buttons to
choose
yES
. Press the
“ENTER”
button and the zoom motor will reset.
To exit out of any of the above options, press the
“MENU”
button.
Operating instructions
