www.prolight.co.uk
Ninja Zoom 250
User Manual
10
Operating instructions
Master/slave mode:
To set the master unit, press the
“MENU”
button and use the
“UP”
and
“DOWN”
buttons to show
NASt
on the LED display. Now press the
“ENTER”
button and use the
“UP”
and
“DOWN”
buttons to
choose
ON
. Press the
“ENTER”
button to confirm the setting. Then select your desired program.
To set the other units in slave mode, press the
“MENU”
button and use the
“UP”
and
“DOWN”
buttons
to show
SLnd
on the LED display. Now press the
“ENTER”
button and use the
“UP”
and
“DOWN”
buttons to choose either
SL 1
or
SL 2
. Press the
“ENTER”
button to confirm the setting.
The unit will now run in sequence with the master unit.
To exit out of any of the above options, press the
“MENU”
button.
Please ensure that all slave units are set to the same DMX channel mode as the master unit.
Show modes:
To access the built-in show modes press
“MENU”
until the display shows
SHNd
on the LED display.
Press
“ENTER”
to confirm the setting. Use the
“UP”
and
“DOWN”
buttons to select a program from
SH 0
~
SH 9
. Press the
“ENTER”
button to confirm the setting.
To change the speed of the selected program (except Show 0) press the
“ENTER”
button and then use
the
“UP”
and
“DOWN”
buttons to select any value from
SP00
~
SP99
.
Press the
“ENTER”
button to confirm the setting, then use the
“UP”
and
“DOWN”
buttons to select the
zoom value from
z000
~
z255
or
CONt
for continuous zoom in out.
Press the
“ENTER”
button to confirm the setting.
In
SH 0
you are able to set a specific static colour. When in
SH 0
press the
“ENTER”
button and
then use the
“UP”
and
“DOWN”
buttons to go through the static colours
C001
~
C064
.
Press the
“ENTER”
button to confirm the setting, then use the
“UP”
and
“DOWN”
buttons to select the
zoom value from
z000
~
z255
or
CONt
for continuous zoom in out.
Press the
“ENTER”
button to confirm the setting.
To exit out of any of the above options, press the
“MENU”
button.
Sound mode:
To access the sound mode setting, press the
“MENU”
button and use the
“UP”
and
“DOWN”
buttons
to show
SOUN
on the LED display. Now press the
“ENTER”
button and use the
“UP”
and
“DOWN”
buttons to choose between
ON
or
OFF
. Press the
“ENTER”
button to confirm the setting.
To exit out of any of the above options, press the
“MENU”
button.
Sound sensitivity:
To adjust the sound sensitivity, press the
“MENU”
button and use the
“UP”
and
“DOWN”
buttons to show
SENs
on the LED display. Now press the
“ENTER”
button and use the
“UP”
and
“DOWN”
buttons to
choose between
000
~
100
.
Press the
“ENTER”
button to confirm the setting.
Value: 000 - 100 (000 = low, 100 = high)
To exit out of any of the above options, press the
“MENU”
button.
