www.prolight.co.uk
PF 35 Profile Spot
User Manual
8
Operating instructions
+
–
0
SL
S
F
D
A
CW
2
1
3
5
4
6
8
7
9
DIMMING
FLASH
DMX MODE
AUTO RUN
BLACKOUT
SLAVE
SET ADDR
01
04
08
05
09
07
02
08
03
06
IR remote functions:
01 - Sets the unit into blackout off/on (LED on/off).
02 - Runs the fade in/out mode, use the ‘+’ and ‘–’ buttons
to adjust the program speed.
03 - Runs the manual dimming mode. Press this button followed
by the ‘+’ and ‘–’ buttons to adjust brightness (000-255).
Press the Flash button followed by the ‘+’ and ‘–’ buttons
to adjust the flash speed.
04 - Sets the flash speed in manual dimming mode. Press this
button followed by the ‘+’ and ‘–’ buttons to adjust the flash
speed.
05 - Sets the unit in slave mode.
06 - Sets the DMX address. Press this button followed by the
‘+’ and ‘–’/number buttons to adjust the DMX address.
07 - Sets the DMX address, channel and dimming curve.
When in DMX address mode press this button followed by the ‘+’
and ‘–’/number buttons to adjust the DMX address.
When in DMX channel mode press this button followed by the ‘+’
and ‘–’ buttons to select the required DMX channel mode.
When in dimming curve mode press this button followed by the
‘+’ and ‘–’ buttons to select the dimming curve required (see
page 6 for dimming curves).
08 - Adjusts the fade in/out speed, flash speed, manual dimming
brightness, DMX address, DMX channel and dimmer curves.
09 - Number buttons to be used when setting the DMX address.
