www.prolight.co.uk
PF 35 Profile Spot
User Manual
7
Operating instructions
Manual dimming mode:
To access the manual dimming mode press the
“MENU”
button until the display shows
“MANUAL WHIE”
on the LCD display. Use the
“UP”
and
“DOWN”
buttons to select the required brightness from
“000”
~
“255”
. Press the
“ENTER”
button and then use the
“UP”
and
“DOWN”
buttons to select the flash speed
from from
“00”
~
“15”
. Press the
“ENTER”
button to confirm the setting.
Value: 000 - 255 (000 = low brightness, 255 = high brightness)
Value: 00 - 15 (00 = no flash, 15 = fast flash speed)
To exit out of any of the above options, press the
“MENU”
button.
Fade in/out mode:
To access the fade in/out mode, press
“MENU”
until the display shows
“FADE RUN”
on the LCD
display. Use the
“UP”
and
“DOWN”
buttons to select the required fade speed from
“01”
~
“16”
.
Press the
“ENTER”
button to confirm the setting.
Value: 01 - 16 (01 = slow speed, 16 = fast speed)
To exit out of any of the above options, press the
“MENU”
button.
Backlight setting:
To access the units backlight setting, press
“MENU”
until the display shows
“OPTION BLGT”
on the LCD
display. Use the
“UP”
and
“DOWN”
buttons to select the between
“ON”
(backlight on) and
“OFF”
(backlight goes off after 20 seconds). Press the
“ENTER”
button to confirm the setting.
To exit out of any of the above options, press the
“MENU”
button.
IR setting:
To access the units IR setting, press
“MENU”
until the display shows
“OPTION BLGT”
on the LCD display.
Press the
“ENTER”
button to show
“OPTION IR”
on the LCD display and use the
“UP”
and
“DOWN”
buttons to select the between
“ON”
(IR receiver on) and
“OFF”
(IR receiver off).
Press the
“ENTER”
button to confirm the setting.
To exit out of any of the above options, press the
“MENU”
button.
Reset factory settings:
To reset the unit back to its factory settings, press
“MENU”
until the display shows
“OPTION BLGT”
on
the LCD display. Press the
“ENTER”
button twice to show
“SYSRESET”
on the LCD display. Press both the
“UP”
and
“DOWN”
buttons together and the unit will reset to factory settings.
Press the
“ENTER”
button to confirm the setting.
To exit out of any of the above options, press the
“MENU”
button.
