7
black,
brown, grey
brown
yellow/ green
blue
blue
fig. 4
2. Hold bracket against the wall and mark drill points, drill the holes, insert the dowel.
Use suitable material for wooden walls or lightweight walls.
Fasten the bracket with screws and washers.
3.
Disconnect the power supply for the connecting cable!
Prepare the current-less cable in according to statutory regulations.
4. Fasten the LED floodlight with the screws (fig.1), washers and tooth washers on the
bracket. Align the LED spotlight and tighten the screws.
5. Connect the wires according the marks.
Switch on the power supply.
fig. 2
fig.1
Installation
1. Screw out boths screws and remove washers and bracket.
fig. 3
