6
IMPORTANT:
Read all instructions carefully.
Only use the unit as described in these instructions. Any other use will be deemed as not
in accordance with the instructions and may lead to damage to property or even injury
to persons. The manufacturer accepts no liability for damage caused by use not in accor-
dance with the instructions.
If you do not understand this instruction, contact your dealer.
Check the device for transport damage. Those has to be reported to the
forwarder/carrier.
SAFETY:
Danger to life!
The wiring must run according to local statutory regulations and guidelines.
All work must be carried out only by a qualified electrician.
For a tightness level according to IP65, the cable connection must be sealed properly
(e.g. junction box)
Do not install the floodlight in near of open fire, damp or very hot areas.
If the floodlight case or mains cable is defective or shows other signs of visible damage,
do not use the floodlight.
Never open the unit case. Repairs may only be carried out by an authorised specialist
workshop. Only use parts which conform to the original unit specifications. There are
electrical and mechanical parts in this unit which are essential in order to avoid exposure
to sources of danger.
Before drilling, make sure that no power, water or gas lines are present where the flood-
light is to be mounted.
Make sure that the wall can carry the weight of the floodlight.
WARNING:
Disconnect power during installation and before servicing.
These procedures should only be performed by a qualified electrician.
Supply power should be turned off when replacing components or checking connec-
tions.
Never perform maintenance or cleaning while electric tension is not de-energized.
For your own protection, please wear protective goggle and dust mask.
