Cleaning & Maintenance
Maintenance:
1.
This is a medical device, it is important to keep it clean.
2. There are no “user” serviceable parts in this device.
3. The device includes only an On/Off switch: all settings
are set at the factory.
4. Use only supplied Power Supply.
Cleaning:
1. Turn device off and unplug from any power source.
2. Do not clean the LED lights with any liquid or damp cloth.
Use air blower device like a blow dryer or computer air
cleaner to remove particles and dust from LEDs.
3. Clean device exterior with damp cloth or
rubbing alchol.
4. Allow to dry completely prior to use.
Troubleshooting
1. System not turning on:
a. Is power cord pushed firmly into outlet
?
b. Try a different wall outlet to confirm
power is available.
c. Is power cord pushed firmly into panel
?
d. Is On/Off button turned on?
e. If device still does not turn on call Customer Service.
2. System shuts off automatically:
a. If the device gets too hot it is designed to shut off
automatically to avoid damage to electrical parts
b. Make sure ventilation holes on back are not covered or
blocked.
c.
Allow device to cool down for several minutes, then
attempt to turn device on again.
d. If device continues to shut down please contact
Customer Service.
