Recessed Installation
Endcaps
Tilt in the bracket arms and pass the lighting fixture through the hole in
the wall or ceiling, until flush with surface. The springs will release to
secure the fixture in place.
Feed the lead wires through the endcap. Apply glue to the inner part of
the endcaps. Slide and press the encaps into place.
6
5
INSTALLATION INSTRUCTIONS
MODELS:
VarioContour 1500 Aluminum Profile
ATTENTION
Please read all safety and assembly instructions prior to installation and keep for future reference.
2
(2)
LED Linear
™
USA, Inc. |
Edition: 20/01/2019
|
LED LINEAR RESERVES THE RIGHTS TO CHANGE SPECIFICATIONS WITHOUT NOTICE
Powering
Ensure the correct (wattage & voltage) power supply is used to power the
tape. Then proceed to connect low voltage wires from extrusion to power
supply. For more information please refer to power supply and LED tape
wiring instructions.
7
Low Voltage
Tape in Aluminum Channel
Line Voltage
Class 2
Power Supply
