www.lectrosonics.com
3
Battery Installation
The transmitter is powered by two
AA batteries. We recommend using
lithium for longest life.
Because some batteries run down
quite abruptly, using the Power
LED to verify battery status will not
be reliable. However, it is possible
to track battery status using the
battery timer function available in
Lectrosonics Digital Hybrid Wireless
receivers.
The battery door opens by simply
unscrewing the knurled knob part
way until the door will rotate. The
door is also easily removed by un-
screwing the knob completely, which
is helpful when cleaning the battery
contacts. The battery contacts can
be cleaned with alcohol and a cot-
ton swab, or a clean pencil eraser.
Be sure not to leave any remnants
of the cotton swab or eraser crumbs
inside the compartment.
A small pinpoint dab of silver
conductive grease* on the thumb-
screw threads can improve battery
performance and operation. Do this
if you experience a drop in bat-
tery life or an increase in operating
temperature.
Insert the batteries according to
the markings on the back of the
housing. If the batteries are inserted
incorrectly, the door may close but
the unit will not operate.
*if you are unable to locate a sup-
plier of this type of grease - a local
electronics shop for example - con-
tact the factory for a small mainte-
nance vial.
Menu Shortcuts
From the Main/Home Screen, the
following shortcuts are available:
•
Record: Press the MENU/SEL
+ UP arrow simultaneously
•
Stop Recording: Press the
MENU/SEL + DOWN arrow
simultaneously
NOTE: The shortcuts are
only available from the main/
home screen AND when a
microSDHC memory card is
installed.
Summary of Contents for SMWB series
Page 20: ......