Lectrosonics SMWB series Quick Start Manual Download Page 2

Page: 2 / 20

LECTROSONICS, INC.

Controls and Functions

Modulation

Indicators

Battery

Status LED

-40

-20

REC

Audio

Input

Jack

Antenna

Port

microSDHC memory

card port

Antenna

Port

Audio

Input

Jack

microSDHC

memory card

port

SMWB Series

The SMWB transmitter delivers the advanced technology and features of Digital

Hybrid Wireless

and combines 24-bit digital audio chain with an analog FM

radio link to eliminate a compandor and its artifacts, yet preserves the extended

operating range and noise rejection of the finest analog wireless systems. DSP

“compatibility modes” allow the transmitter to also be used with a variety of

analog receivers by emulating the compandors found in earlier Lectrosonics

analog wireless and IFB receivers, and certain receivers from other manufactur-

ers (contact the factory for details).
Plus, the SMWB has a built in recording function for use in situations where RF

may not be possible or to work as a stand alone recorder. The record function

and transmit functions are exclusive of each other - you cannot record AND

transmit at the same time. The recorder samples at 44.1kHz rate with a 24 bit

sample depth. (the rate was selected due to the required 44.1kHz rate used for

the digital hybrid algorithm). The micro SDHC card also offers easy firmware

update capabilities without the need for a USB cable or driver issues.

Summary of Contents for SMWB series





















Search results

Summary of Contents for SMWB series

Reviews:

Related manuals for SMWB series

Brands by name

Popular brands

Lectrosonics SMWB series, Quick Start Manual

Search results

Summary of Contents for SMWB series

Reviews:

Related manuals for SMWB series

Brands by name

Popular brands