Digital IEM System
Rio Rancho, NM
25
Specifications
M2R Receiver
Operating Spectrum:
470.100 - 614.375 MHz
Modulation Type:
8PSK with Forward Error
CorrectionOccupied
Latency:
Digital Source:
1.0 ms over Dante Network
Analog Source:
<1.4 ms
Audio Performance:
Frequency Response:
20Hz - 15 KHz, - 3dB
THD+N:
0.15% (1kHz @ -10 dBFS)
Dynamic Range:
>95 dB weighted
Adjacent Channel Isolation
>85dB
Diversity Type:
Switched antenna phase,
during packet headers
Audio Output:
3.5 mm stereo jack
Power requirements:
2 x AA batteries (3.0V)
Battery life:
7 hours; (2) Lithium AA
Power consumption:
1 W
Dimensions:
Height: 3.0 in. / 120 mm.
(with knob)
Width: 2.375 in. /
60.325 mm.
Depth: .625 in. /
15.875 mm.
Weight:
9.14 ounces / 259 grams
(with batteries)
M2T Transmitter
RF Power Output:
• Two carriers; two audio channels each
• Power adjustable on each carrier to
10, 25 or 50 mW
Antenna Output:
2 x BNC sockets
Operating Frequencies: 470.100 – 607.975 MHz
Frequency Selection Steps: 25 kHz
Frequency Stability:
± 0.002%
Modulation:
8 PSK
Emission Designator: 200KG7E
Spurious Radiation:
Compliant with ETSI EN 300 422-1
Equivalent input Noise: –128 dBV
Audio Frequency Response: 20 Hz - 15 kHz
Audio Input:
-10 dBV or +4 dBu settings w/ ±5 dB trim
Audio Input Jack:
4 x combo XLR/TRS connectors
Input impedance: Line: 2k Ohm
Dante Connection:
2 x RJ45, 4 audio RX channels, internally routable
Ethernet Connection: RJ45
USB Connection:
Micro USB on front panel for firmware updates
IRDA:
IR transceiver for sync of receivers
Headphone jack 3.5 mm stereo jack
Power Requirements: 9-18 VDC
Power Consumption: 5 Watts
Dimensions: Height: 1.750 in. / 44.45 mm
Width: 8.375 in. / 212.7 mm
Depth: 7.750 in. / 196.8 m.
Specifications subject to change without notice.
Summary of Contents for M2R
Page 30: ...Duet LECTROSONICS INC 30 ...
