Digital IEM System
Rio Rancho, NM
13
Limiter
Limiter function allows the user to set volume and
dynamic range for headphone use.
Gain
- The default setting (0) is linear, but if additonal
volume is needed, use the UP and DOWN arrows to
adjust the audio by up to +18 dB in 3dB steps.
WARNING: Increasing the Gain can make
headphone volume excessively loud. Use
caution when setting and using.
Threshold
- Use the UP and DOWN arrows to adjust
the threshold for limiter engagement in 3dB incre-
ments.
NOTE: A common setup to play loud and bring
softer dynamics up a bit is to set the pregain at
+6 or +9 dB and set the threshold for -3 or -6dB.
HF Boost
Adjusts loudness of higher
frequencies in the audio
output as preferred by the
listener. Corner frequencies
of 5 KHz or 7 KHz can be
selected and boosted.
Meter Mode
Changes the appearance of
the audio level indicator on
the main window; can show
either pre- or post mix audio
levels.
Clear Scan Data
Erases scan results from
memory.
Backlight
Selects the length of time
the backlight on the LCD
remains turned on: Always
on, 30 seconds, and
5 minutes.
Battery Type
Selects the type of battery
being used: Alkaline
or Lithium so the remaining
battery meter on the home
screen is as accurate as
possible.
Compat. Mode
Compatibility mode is available to allow the reciever to
operate with IFB (FM). Icon on main screen is shown
when IFB (FM) Mode is active.
Summary of Contents for M2R
Page 30: ...Duet LECTROSONICS INC 30 ...
