Lectrosonics DMPA12 Reference Manual Download Page 13

Page: 13 / 56

Reference Manual

Rio Rancho, NM

Installing LecNet2 Software and USB Driver

Part of the LecNet2 software package is the control

panels for the DMPA12. This Graphic User Interface

(GUI) is designed to allow easy setup and monitoring of

the DMPA12 using a computer system running Win-

dows Vista, XP or 2000* operating systems.

Installing LecNet2

Software

Use the computer control panel to remove any previ-

ously installed versions of LecNet2 software. (This

will ensure you are using the latest release.)

Insert the LecNet2 program disk supplied with the

Venue Receiver into the CD-ROM drive on the com-

puter system that will be used to set up and control

the Venue Receiver. The CD should automatically

start the installation procedure.

If the CD doesn’t launch automatically, click “Start”

on the Windows Task Bar then click “Run...” and

enter the CD Drive number followed by “Setup.exe”

as shown above.

Follow the on-screen instructions to install the Lec-

Net2 software.

Installing the LecNet2 USB Driver

There are two methods of connecting a Windows-based

computer system to DM Series device, either via a USB

cable or an RS-232 cable. However, although the USB

port offers significantly increased speed and conve-

nience over standard RS-232 links, it does require the

installation of a LecNet2 USB driver.
The LecNet2 USB driver is not part of the standard Win-

dows

driver library. As a result, connecting a computer

system to a DMPA12 for the first time is different than

subsequent installations. There are a few minor differ-

ences between installing the LecNet2 USB drivers on a

Windows 2000 versus a Windows XP system.

USB driver installation (Windows XP)

When a DMPA12 is connected to a Windows XP com-

puter system for the very first time, the Windows

“New

Hardware Found Wizard” automatically opens.

First time installation

When a LecNet2 device is connected to the computer

system for the very first time, the Windows

Found New

Hardware Wizard

automatically opens. Use the follow-

ing procedure to install the LecNet2 USB driver using

the Wizard.

Place the LecNet2 Installation Disk in the computer

system’s CD-ROM drive.

On the first page of the Wizard, select the option

“Install from a list or specific location (Ad-

vanced)”

and click

Next>

to continue.

Select

“Search for the best driver in these loca-

tions.”,

then check the box for

“Search removable

media (floppy, CD-ROM...)”

and click

Next>

continue.

* Windows Vista, XP and 2000 are trademarks of

Microsoft Corporation.

Summary of Contents for DMPA12

























































Search results

Summary of Contents for DMPA12

Reviews:

Related manuals for DMPA12

Brands by name

Popular brands

Lectrosonics DMPA12, Reference Manual

Search results

Summary of Contents for DMPA12

Reviews:

Related manuals for DMPA12

Brands by name

Popular brands